At this point — unless you're tracking for broadcast applications (where they don't work to peak levels) — consider 'normalising' your recording to an optimal level. Normalisation can be used to push the loudest peak to around ‑1dB and increase the volume of the entire recording by the same ratio. Of course, you can also tighten up dynamic range (the difference between the softest and loudest parts of your recording) by manually reducing the loudest sections of the recording before you apply normalisation. On a final note, if you do plan to use a compressor, then you might as well add gain at that stage instead of normalising.
A better, more natural-sounding way to clean up a voice recording, though, is to paste in strips of 'silence' that showcase your home studio at its best. To do this, wake up early (ie. when your house is quiet), turn on your gear and set your levels for a normal job. Then record a full minute of silence at whatever bit depths and sample rates you're likely to be using. Repeat this process for each different mic you use, and save each file in a folder titled Room Tones, or something similarly suitable.
Some might think that the audio portion of a video takes a backseat to the visual portions, but that’s not true. Most video watchers note that they are more likely to stop watching a video with bad audio vs. lower-quality video. In fact, a recent TechSmith study of video viewing habits showed that more than 25% of video viewers watched a video all the way through because the audio was good — more than those who said professional video style was most important.
Also listen for sibilance. Strong 'ess' sounds are best corrected at source, by using good mic technique, but sometimes they're unavoidable. If you hear an 'ess' that really sizzles in your recording, you can manually reduce its volume. You can, of course, also use a de‑esser, but do be careful, as applying some de‑essers to the entire audio file can alter the sound of your recording. It often works best to apply them to short sections, either offline or using automation. My preferred de‑esser plug‑in is the one sold by Eiosis (www.eiosis.com),Make sure you record some silence at the end of each take. That way, if a great performance suffers from noise issues, you have something to feed your noise‑reduction processors. Just don't rely on this technique too much! which cleverly separates the esses from the rest of the audio and allows you to manipulate them independently. If you want to learn about some more advanced strategies for de‑essing check out Mike Senior's article from SOS May 2009 (/sos/may09/articles/deessing.htm).
Recording voice overs like a pro isn’t that difficult when you know how to do it. You may have noticed that the actual recording part plays little part when compared to the preparation. Taking the proper steps before you hit the record button and then taking the time to edit your audio appropriately will go a long way to ensuring your voice overs sound professional and engaging.
"The editing process for all our titles starts with receiving the Pro Tools sessions or WAV files and the engineer's script, which has the markings of how many takes there were, and which ones the director liked best. In some cases, I use Strip Silence and add a bed of room tone to expedite the assembly edit. In others I'll add the room tone as I move through the audio. Once I had all the final takes to be used in [Favorite African Folk Tales], I went back to do a fine‑edit pass and created notes on any issues, such as misreads, mispronunciations, noises, and so on. With that list, I was able to discuss with Alfre how we would address the issues. Since the actors' schedules did not permit them to come back in to do pick‑ups I had to do some creative editing.”
When you come to actually recording your voice, try to think of the mic as the ear of your listener. Picture your listener, have an opinion, and read the script as if the words were coming to mind that instant. The distance between your mouth and the mic should be about the same as the distance between your thumb and pinkie when making a hang‑five gesture (see the picture above). Move closer to the mic when you lower your voice and back off when you speak louder. On‑line dictionaries such as the Merriam‑Webster one pictured here, often include audio examples which can help you clarify pronunciation. Just make sure that you use an American English or UK English (or other language!) version as appropriate. (Remember, while you have your engineer hat on, to take account of this when setting levels.) Always use a pop shield, and I'd suggest trying to work slightly off‑axis, as talking to a point just to the right or left of the mic will prevent bursts of air and drops of saliva ruining your recording. I'd also recommend wearing headphones over one ear only, as this allows you to judge volume and listen for clipping and plosives on the recording, while also hearing your natural voice, which makes it easier to focus on that message we talked about. Simone demonstrates this technique in the picture on the next page. Hhe's working slightly off‑axis and has backed off an inch or two to deliver with more energy.Typically, you'd record with your mouth approximately the distance between your thumb and little finger from the mic, as pictured here.
One of my favorite things about being a voice-over actor is the incredibly supportive community. Use your community to communicate with other voice-over actors regarding rates and best business practices. I have rarely found anyone who is secretive or not willing to share their past experiences. By being a generous and communicative community, we are stronger as voice actors and can advocate for ourselves to get paid appropriately. If you are operating from a home studio and all communication is between yourself and the client (versus an agent as the intermediary) it’s usually your responsibility to invoice after sending your VO files. I always include a polite 30-day payment term at the bottom of my invoice. In certain states (for example, New York) there is a “Freelancing isn’t Free Act”, in which you can politely mention to be paid in a timely manner.
In late 2009, my wife Simone received an email from Prague in the Czech Republic. The sender, Mirek Jirku, was heading up a project to record voice messages for the foreign‑language versions of the latest Avast! anti‑virus software. Mirek sent us eight messages to be recorded, specified the fee and deadline, and requested a slow, friendly read. He asked us to send separate stereo MP3 files (at 160kbps or higher quality) for each message, specified that we'd have to sign a non‑disclosure agreement before recording, that we'd need to invoice afterwards, and that he'd pay via a wire transfer instead of PayPal (which is often used for international payments).
“Bunny Studio Voice has a very efficient process to help us identify the right voice actors that best meet each of our video’s needs. Their platform keeps us informed throughout the process, from the actor accepting the project all the way through when the recording is complete. I highly recommend them as a reliable, high quality and cost-effective voice over provider”
At the end of the day, we all need to have a baseline of what is an acceptable pay rate and what you may need to walk away from politely. This is a competitive market and when you have put in the training, financial investment, technical education in perfecting your studio sound, and countless hours practicing in the booth you must advocate for yourself and know your worth! If you have any questions, reach out to the SAV community. We’re here to be stronger together as you move through your voice acting career!

The annual income of a voice talent varies greatly from person to person and from year to year. When you’re just starting out most of what you earn from voice over work should be reinvested into your studio, demos, and marketing efforts, so at this stage you will need a second job to support your daily living expenses. Once you start building a portfolio of clients, you’ll see your regular earnings grow and will really start to get a feel for the potential your voice over business has. In time, you’ll be enjoying a satisfying career.
Both union and non-union have advantages and disadvantages; ultimately, it’s a decision that you, as a voice over actor, will have to make. Like everything else, it’s of critical importance that you do your research and weigh up the pros and cons. Seasoned pros will usually tell you it’s best to be a union member because, if you run into trouble, the union will fight your cause.
Our recommendation is to start small and reinvest the money you make into upgrading your equipment and set up. All clients, whether they are Pixar or just a guy who needs a voicemail message, expect crystal clear audio recordings. You absolutely MUST be recording in a professional recording environment with professional equipment. They are NOT going to settle for less than perfection. Does this mean spending thousands of dollars? Maybe, eventually it does, but not today. What you’ll need to get started:

“Bunny Studio Voice has a very efficient process to help us identify the right voice actors that best meet each of our video’s needs. Their platform keeps us informed throughout the process, from the actor accepting the project all the way through when the recording is complete. I highly recommend them as a reliable, high quality and cost-effective voice over provider”


The contents of this article are subject to worldwide copyright protection and reproduction in whole or part, whether mechanical or electronic, is expressly forbidden without the prior written consent of the Publishers. Great care has been taken to ensure accuracy in the preparation of this article but neither Sound On Sound Limited nor the publishers can be held responsible for its contents. The views expressed are those of the contributors and not necessarily those of the publishers.
Why the difference in approach? Lots of my e‑learning and corporate jobs are done for production houses that will be adding other voices to the mix. Ironically, if I record my voice via a great mic and preamp, and add some nice processing, it can end up standing out from the other voices, drawing attention to itself. The production house will see this as me causing them a problem, even though my recording sounds better than the others!
Union and non-union jobs have always been two separate markets. Non-union work is more visible and attractive today when compared to years ago, due to online casting. The availability of professional talent for non-union work has led to a reshaping of the voice over industry. An open market means that each professional voice actor sets their own rate based on what they need to cover.
Also listen for sibilance. Strong 'ess' sounds are best corrected at source, by using good mic technique, but sometimes they're unavoidable. If you hear an 'ess' that really sizzles in your recording, you can manually reduce its volume. You can, of course, also use a de‑esser, but do be careful, as applying some de‑essers to the entire audio file can alter the sound of your recording. It often works best to apply them to short sections, either offline or using automation. My preferred de‑esser plug‑in is the one sold by Eiosis (www.eiosis.com),Make sure you record some silence at the end of each take. That way, if a great performance suffers from noise issues, you have something to feed your noise‑reduction processors. Just don't rely on this technique too much! which cleverly separates the esses from the rest of the audio and allows you to manipulate them independently. If you want to learn about some more advanced strategies for de‑essing check out Mike Senior's article from SOS May 2009 (/sos/may09/articles/deessing.htm).
Not all noise can be tackled in this way, though: you need to listen for clicks, plosives, digital glitches and the like. These can normally be acceptably repaired by using a 'heal' tool, or a pencil tool to redraw the waveform. Popped 'p's can often be 'fixed' using a high‑pass filter set at 100Hz. For a single glitch, you can zoom in and cut out the cycle of the waveform in which the glitch appears. Just be careful to start and end the cut where the waveform crosses the centre line, otherwise you'll inadvertently add another digital glitch. If glitches are frequent, it's likely that there's a problem with your audio interface's buffer settings — it may be just a playback issue.
Our recommendation is to start small and reinvest the money you make into upgrading your equipment and set up. All clients, whether they are Pixar or just a guy who needs a voicemail message, expect crystal clear audio recordings. You absolutely MUST be recording in a professional recording environment with professional equipment. They are NOT going to settle for less than perfection. Does this mean spending thousands of dollars? Maybe, eventually it does, but not today. What you’ll need to get started:

Even if you're mixing yourself, it's better to add EQ and compression only when you can hear how it will sit with the soundtrack or special effects. Ultimately, it comes down to knowing what your voice will be used for and making a judgement. For instance, if I'm recording a tagline for a TV or radio advert, I'll generally run a mic into a nice preamp (where I might add slight tube warmth, and subtle EQ or compression, just to give the recording a bit of 'body'), and I may do a little de‑essing using a plug‑in when performing any edits. However, for e‑learning jobs, corporate videos and so on, I'll tend not to add any creative processing while recording or editing, and will only use the de‑esser ever so slightly.
1. You need to get oriented with the industry. You need an education in this business prior to investing in it—especially if you hope to be valuable as a voiceover talent. You need to understand who your core clients would be and who you would eventually create a voiceover demo for, namely, producers. If you’re not servicing them, then you’re not servicing your self. This is precisely why I wrote, “The SOUND ADVICE Encyclopedia of Voiceover & The Business of Being a Working Talent.” You need insight as to what’s needed and wanted of you in this field, and how professional sessions are run, otherwise you’ll likely frustrate yourself with unrealistic expectations.
Perhaps you come from a corporate business background, but you have a remarkable capacity for accents and original character voices, or you’ve been in radio and broadcasting for a number of years. If you’re an actor looking to expand your employment opportunities, mastering voiceover is imperative considering it’s required in every manner of recorded media: film, TV, animation, games, corporate industrials, and commercials. Whatever your specific experience has been to date, getting started in voiceover most often requires the following:

There are lots of ways to get voice acting work, from online sites such as Bodalgo.com, Mandy.com, Voice123 and Voices.com. These are known as pay to play sites. They have lots of opportunities for you to audition, but it is highly competitive. Looking locally for businesses, including radio stations, that need voiceover is also a good way to start.
Another factor to consider is how the project is being used and in which medium. If you record a commercial that’s airing nationally on television, then that is a larger rate than a regional television commercial specific to a certain market. The voice-over spot you worked on is being seen by more viewers nationally as opposed to regionally, which warrants more compensation. You should not only consider your session fee, but also get the specifics on how the voice-over is being used. My personal opinion is to avoid “in perpetuity” usage because as your career develops, something which was not a conflict in the past could be in the future. If the spot you had conflicts with another brand in which you are auditioning, this could become a conflict that was unforeseen when you initially booked and recorded the job.

Even if you're mixing yourself, it's better to add EQ and compression only when you can hear how it will sit with the soundtrack or special effects. Ultimately, it comes down to knowing what your voice will be used for and making a judgement. For instance, if I'm recording a tagline for a TV or radio advert, I'll generally run a mic into a nice preamp (where I might add slight tube warmth, and subtle EQ or compression, just to give the recording a bit of 'body'), and I may do a little de‑essing using a plug‑in when performing any edits. However, for e‑learning jobs, corporate videos and so on, I'll tend not to add any creative processing while recording or editing, and will only use the de‑esser ever so slightly.

Like pacing, vocal tone and inflection refer to ensuring you speak in a natural and pleasant manner. You want to be friendly and engaging, but not so much that you sound fake. No one wants to sound like a game show host. But, you also want to avoid monotone robot voice which, like pacing that’s too slow, can be boring and off-putting for listeners.


If a client likes your demo, they may invite you to audition. In the 21st century, you can download the audition script, record the audition at home, and then send the results to your client over the Internet. Prepare yourself for a life of constant auditions: Even successful voice pros may do many more auditions than actual jobs. But if enough jobs come your way, it's worth it.
3. You need a simple, reliable, home-recording setup. Keep in mind: Your objective is on being the best voice talent you can be, not the best production studio or recording engineer. Nevertheless, you do need the ability to record, edit, and turnaround a proper audition. Do not run out and purchase a mic! You can’t return it, for hygienic reasons. Besides, there’s a bit of a learning curve to this and recent industry advances have made having a home “studio” easier and more affordable than ever before. You could have the best gear and the coolest toys on the block, but if you can’t use them it’s a waste. (Tip: What you’re recording on matters less than where you’re recording. Find a quiet place like a closet full of clothes to record in.)
However, there are lots of second tier voice over agencies and ones that are just getting established. One of your goals as a voice actor should be to get listed by an agency. However, wait until you have at least established yourself and put together a portfolio of work and super hot demos you can send out to them for consideration. When selecting an agent you need to carefully examine who they currently represent and then ask yourself: How do I fit in here? Does this agent have anyone like me on their books? If not, you will most definitely stand a better chance of being represented.
Next, run these files through any standard EQ high‑pass and low‑pass filters you use, zoom in on the waveform, and select a one‑second strip of silence from each recording. Save these strips as separate files. For instance, on my system, a one‑second strip of silence recorded at 16‑bit, 44.1kHz on a Neumann TLM103 would have this name: room_tone_neumann_tlm_103_44100_16_one_second.wav. Ideally, the noise floor of each strip will be lower than ‑60dB. Now, when you have to remove a bump or a squeak between words, you can paste in a piece of these strips instead of muting, which would draw attention to the edit.
"Ideally the talent should be seated, staying on axis, approximately a foot away from the mic, which should be angled back from the face a bit, not parallel to it. You'll need to see what angle provides the best results, usually a few degrees off from parallel works great — and located between the forehead and the nose, not directly in line with the mouth. This will help with plosives, mouth noise, and some other issues. Movement in the booth should be limited, as the microphone is likely to pick up arms flailing, hands rubbing, page turns, stomach growling, and so on. Keep the levels consistent, moving closer if the scene calls for a whisper, or moving back for a loud voice or scream. A well‑versed narrator is capable of delivering a dynamic performance without creating dynamic levels.”
Both union and non-union have advantages and disadvantages; ultimately, it’s a decision that you, as a voice over actor, will have to make. Like everything else, it’s of critical importance that you do your research and weigh up the pros and cons. Seasoned pros will usually tell you it’s best to be a union member because, if you run into trouble, the union will fight your cause.
Some of you might be wondering about the difference between voice over and narration. The short answer: not much. In most cases, you may use voice over and narration fairly interchangeably. However, to be technically correct, narration typically refers to an audio vocal that describes all the action on screen or tells a story based on what’s happening, while voice over may or may not describe as much action and is often more instructional in nature.

This company has received an equity loan from the Support Program for Technology Entrepreneurs of the Canary Islands JEREMIE Fund and has been 85% co-funded by the European Regional Development Fund from the Canary Islands 2007-2013 ERDF Operational Programme, contributing to the achievement of the objectives of the Axis 2 "Business Development and innovation", the priority theme 9 "Other actions to stimulate research, innovation and entrepreneurship in SMEs.
Important: Use headphones to check the audio quality of your test recording. Your computer speakers will not be good enough for this. Headphones allow you to listen closely to ensure clear audio. Obviously, you want the audio to sound good on even the cheapest speaker, but you will be much happier if you use headphones. Remember, a good portion of your video viewers will listen this way, so you want to be sure they’ll have an optimal experience.
Finally, as you complete more work, you can end up with a lot of different files from your projects, so good 'housekeeping' of your sessions and recordings is a must. Glancing at the filename simone_kliass_avast_virus_database_neumann_tlm_103_original.wav, I can easily tell that this is the original recording of my wife's "Your virus database has been updated” message in Portuguese for Avast! on a Neumann TLM103 mic. It doesn't matter what your system is, as long as it works and you can stick to it.
Get your computer out of the room. Your microphone will pick up fan noise from your computer. Unless you have a solid state drive that is completely silent, you will want to set up a monitor in your studio and run cables through your wall to a computer outside the room. You can use a wireless keyboard and mouse to control your recording software. This also cuts down on the heat of your studio.
"The editing process for all our titles starts with receiving the Pro Tools sessions or WAV files and the engineer's script, which has the markings of how many takes there were, and which ones the director liked best. In some cases, I use Strip Silence and add a bed of room tone to expedite the assembly edit. In others I'll add the room tone as I move through the audio. Once I had all the final takes to be used in [Favorite African Folk Tales], I went back to do a fine‑edit pass and created notes on any issues, such as misreads, mispronunciations, noises, and so on. With that list, I was able to discuss with Alfre how we would address the issues. Since the actors' schedules did not permit them to come back in to do pick‑ups I had to do some creative editing.”
Part of great voice over work is ensuring that you pronounce each word correctly and that you speak clearly enough to be understood. Avoid mumbling but don’t shout or over-enunciate, either. Don’t worry, though. No one expects you to sound like a professional voice actor. The best thing you can do is speak naturally and clearly and the rest will follow in time.
There are now more opportunities in the voiceover industry than ever before — but competition has never been so fierce — so, in this short series of articles I'll set out what you need to know to get started as a home‑studio voiceover artist, and turn it into a paying job. This month, I'll explain some differences between the voiceover and music industries, and run through the different roles you'll need to become good at. Next time, I'll discuss what makes a good voice, the sort of home‑studio setup you need, and how you can start to get the jobs coming in. 

It's only after this sort of processing that I'll start cleaning up the recording and dealing with the gaps of silence between spoken passages. A noise gate (or an off‑line 'strip‑silence' function) can be used to automatically mute sections that fall below a certain level. However, if not used carefully, these tools will clip the 'T's and 'P's off the ends of words, and shut out natural breathing sounds. Worse, if your recording is noisy, a noise gate will actually draw attention to the problem, since your client will be able to hear the difference between room tone and absolute muting. Another trick is to use a downward expander to reduce the noise floor of quiet sections, rather than cut out the noise completely.
3. You need a simple, reliable, home-recording setup. Keep in mind: Your objective is on being the best voice talent you can be, not the best production studio or recording engineer. Nevertheless, you do need the ability to record, edit, and turnaround a proper audition. Do not run out and purchase a mic! You can’t return it, for hygienic reasons. Besides, there’s a bit of a learning curve to this and recent industry advances have made having a home “studio” easier and more affordable than ever before. You could have the best gear and the coolest toys on the block, but if you can’t use them it’s a waste. (Tip: What you’re recording on matters less than where you’re recording. Find a quiet place like a closet full of clothes to record in.)
×