First of all let’s dismiss the obvious – there is no such thing as a standard rate, there are only guide lines and even these vary by Country and type of work. The only standard rates are those set by some Union scale rates. One of the most notable differences is that between voice over union rates and voice over rates non-union. Unions provide a standard voiceover rate and therefore you can safely rely on the unions guide (depending on which Country you are in). However, non union voice over rates vary enormously and are often down to negotiations between the voice over actor and the client.
Next, go back to the beginning and start editing out your mistakes. I also like to edit out any abnormally long silences between sentences or statements and any weird sounds that don’t belong. Remember, though, that pauses are ok (and even necessary) to help break up the audio and make it feel more natural and conversational, so don’t go hog wild with it.
If a client likes your demo, they may invite you to audition. In the 21st century, you can download the audition script, record the audition at home, and then send the results to your client over the Internet. Prepare yourself for a life of constant auditions: Even successful voice pros may do many more auditions than actual jobs. But if enough jobs come your way, it's worth it.
Always keep it professional. A client may not have a budget that works within your rates presently, but one day they may have a project with a much larger budget and think of you as the talent to circle back to! It never hurts to politely decline when a project has too low of a rate and exclaim, “I would love to work with you in the future when our rates align!”
Get your computer out of the room. Your microphone will pick up fan noise from your computer. Unless you have a solid state drive that is completely silent, you will want to set up a monitor in your studio and run cables through your wall to a computer outside the room. You can use a wireless keyboard and mouse to control your recording software. This also cuts down on the heat of your studio.
"Ideally the talent should be seated, staying on axis, approximately a foot away from the mic, which should be angled back from the face a bit, not parallel to it. You'll need to see what angle provides the best results, usually a few degrees off from parallel works great — and located between the forehead and the nose, not directly in line with the mouth. This will help with plosives, mouth noise, and some other issues. Movement in the booth should be limited, as the microphone is likely to pick up arms flailing, hands rubbing, page turns, stomach growling, and so on. Keep the levels consistent, moving closer if the scene calls for a whisper, or moving back for a loud voice or scream. A well‑versed narrator is capable of delivering a dynamic performance without creating dynamic levels.”
You start off each job as a producer, consulting your client and getting briefed on the project at hand. Then you become an engineer, dealing with recording gear and software, setting the mic position and levels. Next, you step up to the mic as an actor, bringing the script off the page and connecting with the listener. Meanwhile, the director in you sits behind the metaphorical glass, making sure the actor doesn't mispronounce a word or stumble through a passage of text. Then you're an editor, cleaning up the best take and sending the resulting audio to your client. You need to be able to perform all of these roles to a high standard, and the better you are at each, the more your business will prosper.
Next, run these files through any standard EQ high‑pass and low‑pass filters you use, zoom in on the waveform, and select a one‑second strip of silence from each recording. Save these strips as separate files. For instance, on my system, a one‑second strip of silence recorded at 16‑bit, 44.1kHz on a Neumann TLM103 would have this name: room_tone_neumann_tlm_103_44100_16_one_second.wav. Ideally, the noise floor of each strip will be lower than ‑60dB. Now, when you have to remove a bump or a squeak between words, you can paste in a piece of these strips instead of muting, which would draw attention to the edit.
Digital Commercials are defined as spots that are used to advertise a product or service that are run on websites or platforms other than the client's own. For example, a 15 second recording that plays on YouTube before the requested content begins. Explainer videos are not included in this rate, they fall into INTERNET USAGE / EXPLAINER in another category.
No place is totally silent, so find the best place you can — even if that means thinking outside the box. I have a friend who regularly records his podcast in his car. He lives in a small house with dogs and kids, so there really isn’t anywhere else quiet enough. He takes his laptop and mic out to his driveway, shuts himself in the car and records. The results are surprisingly good!
Much of the working week as a voice actor, is taken up with auditioning. The success of auditions will depend on your skill, understanding of the brief, speed to deliver, your technical ability and how well you record your voice. By tracking and improving your success your can improve the ratio of auditions to paid work. This in itself requires you to match your voice to the auditions that are a natural fit to your vocal ability and style. As your experience and voice skills expand, so the breadth of work that you can audition for increases.
Finally, as you complete more work, you can end up with a lot of different files from your projects, so good 'housekeeping' of your sessions and recordings is a must. Glancing at the filename simone_kliass_avast_virus_database_neumann_tlm_103_original.wav, I can easily tell that this is the original recording of my wife's "Your virus database has been updated” message in Portuguese for Avast! on a Neumann TLM103 mic. It doesn't matter what your system is, as long as it works and you can stick to it.
I use the Adobe Audition package to edit my own voiceover work, but the techniques described below can be used in most audio‑editing software. Start by saving a new version of your original recording. (I keep the name of the file the same, but change the extension from _original to _edit.) Next, I'll turn my attention to the end of the recording, where I stepped away from the mic after the second take and recorded about 10 seconds of silence. Although processing is usually kept to a minimum, dealing with sibilance is important, and Eiosis' De‑esser plug‑in is much more precise than most.Wearing headphones, I can zoom in on this 'silence', turn up the volume, and listen for any background noise. If I notice any constant noise seeping into the recording, I may consider using Adobe Audition's noise‑reduction tool to capture a one‑ or two‑second profile of the silence, and then reduce the offending noise by about 75 percent throughout the recording. I should stress that this is rarely needed, and it's always a last resort, because such processing can generate swirly, metallic artifacts that draw more attention to themselves than the noise you intended to eliminate! But it's good to listen for such issues with fresh ears at the start of your editing session. If you find yourself using noise‑reduction often, that's a sign that you should find a better place to record, or improve the isolation of the space you've chosen. Don't forget that there are other ways to deal with some noise: often, a high‑pass filter is all you will need to clean up a recording, for example. Also remember that if your recording is to be mixed with music, slight background noise won't be noticeable, and that the more exposed your voice in the end product, the more problematic noise will become.
“Bunny Studio Voice is an indispensable part of my production workflow. Using them saves me time and money compared to hiring a recording studio and VO artist. Without a doubt, their best feature is customer service. Thanks to their enormous support, I have saved DAYS off my deadlines and received pitch-perfect reads. I couldn’t recommend them more”
This guide is designed to give you an insight into this hidden world and provide you with enough information to help you make an informed choice on whether or not this is a potential career for you. If you already are a voice actor, we will be giving you some tips and ideas to help you improve your voice acting skills to help you experience a dramatic difference in how you approach the written word.
This company has received an equity loan from the Support Program for Technology Entrepreneurs of the Canary Islands JEREMIE Fund and has been 85% co-funded by the European Regional Development Fund from the Canary Islands 2007-2013 ERDF Operational Programme, contributing to the achievement of the objectives of the Axis 2 "Business Development and innovation", the priority theme 9 "Other actions to stimulate research, innovation and entrepreneurship in SMEs.
There are now more opportunities in the voiceover industry than ever before — but competition has never been so fierce — so, in this short series of articles I'll set out what you need to know to get started as a home‑studio voiceover artist, and turn it into a paying job. This month, I'll explain some differences between the voiceover and music industries, and run through the different roles you'll need to become good at. Next time, I'll discuss what makes a good voice, the sort of home‑studio setup you need, and how you can start to get the jobs coming in.
Some might think that the audio portion of a video takes a backseat to the visual portions, but that’s not true. Most video watchers note that they are more likely to stop watching a video with bad audio vs. lower-quality video. In fact, a recent TechSmith study of video viewing habits showed that more than 25% of video viewers watched a video all the way through because the audio was good — more than those who said professional video style was most important.
Important: Use headphones to check the audio quality of your test recording. Your computer speakers will not be good enough for this. Headphones allow you to listen closely to ensure clear audio. Obviously, you want the audio to sound good on even the cheapest speaker, but you will be much happier if you use headphones. Remember, a good portion of your video viewers will listen this way, so you want to be sure they’ll have an optimal experience.
Some of you might be wondering about the difference between voice over and narration. The short answer: not much. In most cases, you may use voice over and narration fairly interchangeably. However, to be technically correct, narration typically refers to an audio vocal that describes all the action on screen or tells a story based on what’s happening, while voice over may or may not describe as much action and is often more instructional in nature.
A better, more natural-sounding way to clean up a voice recording, though, is to paste in strips of 'silence' that showcase your home studio at its best. To do this, wake up early (ie. when your house is quiet), turn on your gear and set your levels for a normal job. Then record a full minute of silence at whatever bit depths and sample rates you're likely to be using. Repeat this process for each different mic you use, and save each file in a folder titled Room Tones, or something similarly suitable.
The contents of this article are subject to worldwide copyright protection and reproduction in whole or part, whether mechanical or electronic, is expressly forbidden without the prior written consent of the Publishers. Great care has been taken to ensure accuracy in the preparation of this article but neither Sound On Sound Limited nor the publishers can be held responsible for its contents. The views expressed are those of the contributors and not necessarily those of the publishers.