Keep it respectable and charge what your time and services are worth. That means establishing some minimums. For example, you might set a minimum price of $100 per job. So if the client says they can get it done locally for less than half that price, you explain that they are getting a professional recording and the difference is in the quality of the recording.
It's a good idea to record with one ear free from your headphones, as this helps you to deliver a more natural performance.When recording solo, I find the role of director the hardest to play. How can you lose yourself in the moment if you're on the lookout for mistakes? If you stop each time you mispronounce a word or use the wrong intonation, your spoken‑word recording will sound choppy and unnatural. It's for this reason that I like to record each job twice. The first time, I push the director out of the room and focus on the message. If possible, I even let the soundtrack of the video I'm narrating play quietly in my headphones, and I don't stop for mistakes any more than I would if I were telling a story to a friend. During the second take, I let the director back into the room, to make sure I pronounce everything correctly and emphasise the correct information — though I still try to keep the performance honest and natural.
1. You need to get oriented with the industry. You need an education in this business prior to investing in it—especially if you hope to be valuable as a voiceover talent. You need to understand who your core clients would be and who you would eventually create a voiceover demo for, namely, producers. If you’re not servicing them, then you’re not servicing your self. This is precisely why I wrote, “The SOUND ADVICE Encyclopedia of Voiceover & The Business of Being a Working Talent.” You need insight as to what’s needed and wanted of you in this field, and how professional sessions are run, otherwise you’ll likely frustrate yourself with unrealistic expectations.
Also listen for sibilance. Strong 'ess' sounds are best corrected at source, by using good mic technique, but sometimes they're unavoidable. If you hear an 'ess' that really sizzles in your recording, you can manually reduce its volume. You can, of course, also use a de‑esser, but do be careful, as applying some de‑essers to the entire audio file can alter the sound of your recording. It often works best to apply them to short sections, either offline or using automation. My preferred de‑esser plug‑in is the one sold by Eiosis (www.eiosis.com),Make sure you record some silence at the end of each take. That way, if a great performance suffers from noise issues, you have something to feed your noise‑reduction processors. Just don't rely on this technique too much! which cleverly separates the esses from the rest of the audio and allows you to manipulate them independently. If you want to learn about some more advanced strategies for de‑essing check out Mike Senior's article from SOS May 2009 (/sos/may09/articles/deessing.htm).
It's only after this sort of processing that I'll start cleaning up the recording and dealing with the gaps of silence between spoken passages. A noise gate (or an off‑line 'strip‑silence' function) can be used to automatically mute sections that fall below a certain level. However, if not used carefully, these tools will clip the 'T's and 'P's off the ends of words, and shut out natural breathing sounds. Worse, if your recording is noisy, a noise gate will actually draw attention to the problem, since your client will be able to hear the difference between room tone and absolute muting. Another trick is to use a downward expander to reduce the noise floor of quiet sections, rather than cut out the noise completely.
Even if you're mixing yourself, it's better to add EQ and compression only when you can hear how it will sit with the soundtrack or special effects. Ultimately, it comes down to knowing what your voice will be used for and making a judgement. For instance, if I'm recording a tagline for a TV or radio advert, I'll generally run a mic into a nice preamp (where I might add slight tube warmth, and subtle EQ or compression, just to give the recording a bit of 'body'), and I may do a little de‑essing using a plug‑in when performing any edits. However, for e‑learning jobs, corporate videos and so on, I'll tend not to add any creative processing while recording or editing, and will only use the de‑esser ever so slightly.