In other words, Mirek gave us all the information we needed to start the job. Unfortunately, though, that's not how it usually works! Usually, you'll need to work hard to get all the information you need from your client to do the job well. If you're at all uncertain about their expectations, whether about the performance, or about technical and organisational issues such as file formats or payment procedures, save yourself time and a headache by clearing up all doubts beforehand, and don't hit the record button until your client has given you the green light by email. With that sorted, you can more easily don your other hats and get on with the job.
It's only after this sort of processing that I'll start cleaning up the recording and dealing with the gaps of silence between spoken passages. A noise gate (or an off‑line 'strip‑silence' function) can be used to automatically mute sections that fall below a certain level. However, if not used carefully, these tools will clip the 'T's and 'P's off the ends of words, and shut out natural breathing sounds. Worse, if your recording is noisy, a noise gate will actually draw attention to the problem, since your client will be able to hear the difference between room tone and absolute muting. Another trick is to use a downward expander to reduce the noise floor of quiet sections, rather than cut out the noise completely.
Some might think that the audio portion of a video takes a backseat to the visual portions, but that’s not true. Most video watchers note that they are more likely to stop watching a video with bad audio vs. lower-quality video. In fact, a recent TechSmith study of video viewing habits showed that more than 25% of video viewers watched a video all the way through because the audio was good — more than those who said professional video style was most important.

When surveyed clients often list price as less important to them than the voice quality (fit to their brief), the recording studio quality, the time of turnaround…The point is that they want people that are reliable and can add value not just through their voice but also in the production stages and the speed at which they adapt to the client brief.
Next, run these files through any standard EQ high‑pass and low‑pass filters you use, zoom in on the waveform, and select a one‑second strip of silence from each recording. Save these strips as separate files. For instance, on my system, a one‑second strip of silence recorded at 16‑bit, 44.1kHz on a Neumann TLM103 would have this name: room_tone_neumann_tlm_103_44100_16_one_second.wav. Ideally, the noise floor of each strip will be lower than ‑60dB. Now, when you have to remove a bump or a squeak between words, you can paste in a piece of these strips instead of muting, which would draw attention to the edit.
Perhaps you come from a corporate business background, but you have a remarkable capacity for accents and original character voices, or you’ve been in radio and broadcasting for a number of years. If you’re an actor looking to expand your employment opportunities, mastering voiceover is imperative considering it’s required in every manner of recorded media: film, TV, animation, games, corporate industrials, and commercials. Whatever your specific experience has been to date, getting started in voiceover most often requires the following:
This guide is designed to give you an insight into this hidden world and provide you with enough information to help you make an informed choice on whether or not this is a potential career for you. If you already are a voice actor, we will be giving you some tips and ideas to help you improve your voice acting skills to help you experience a dramatic difference in how you approach the written word.
I use the Adobe Audition package to edit my own voiceover work, but the techniques described below can be used in most audio‑editing software. Start by saving a new version of your original recording. (I keep the name of the file the same, but change the extension from _original to _edit.) Next, I'll turn my attention to the end of the recording, where I stepped away from the mic after the second take and recorded about 10 seconds of silence. Although processing is usually kept to a minimum, dealing with sibilance is important, and Eiosis' De‑esser plug‑in is much more precise than most.Wearing headphones, I can zoom in on this 'silence', turn up the volume, and listen for any background noise. If I notice any constant noise seeping into the recording, I may consider using Adobe Audition's noise‑reduction tool to capture a one‑ or two‑second profile of the silence, and then reduce the offending noise by about 75 percent throughout the recording. I should stress that this is rarely needed, and it's always a last resort, because such processing can generate swirly, metallic artifacts that draw more attention to themselves than the noise you intended to eliminate! But it's good to listen for such issues with fresh ears at the start of your editing session. If you find yourself using noise‑reduction often, that's a sign that you should find a better place to record, or improve the isolation of the space you've chosen. Don't forget that there are other ways to deal with some noise: often, a high‑pass filter is all you will need to clean up a recording, for example. Also remember that if your recording is to be mixed with music, slight background noise won't be noticeable, and that the more exposed your voice in the end product, the more problematic noise will become.
As editor, you need to turn the raw recording into the final version of the file you'll be sending to your client. Editing during a recording session can be problematic, and particularly so if you're recording in a domestic environment. How can you expect to hear the drone of the dishwasher ruining your recording if the dishwasher is still running as you edit? I'll look in more detail at setting up a voiceover recording studio next time, but for now, if recording in a separate room or isolated booth isn't an option, at least try to edit the file the following morning (or maybe at night) when there's less noise around — because hearing your recording with a fresh ear and in a quieter environment will help you to make better editing decisions, and will reveal noises that slipped your attention earlier.
I use the Adobe Audition package to edit my own voiceover work, but the techniques described below can be used in most audio‑editing software. Start by saving a new version of your original recording. (I keep the name of the file the same, but change the extension from _original to _edit.) Next, I'll turn my attention to the end of the recording, where I stepped away from the mic after the second take and recorded about 10 seconds of silence. Although processing is usually kept to a minimum, dealing with sibilance is important, and Eiosis' De‑esser plug‑in is much more precise than most.Wearing headphones, I can zoom in on this 'silence', turn up the volume, and listen for any background noise. If I notice any constant noise seeping into the recording, I may consider using Adobe Audition's noise‑reduction tool to capture a one‑ or two‑second profile of the silence, and then reduce the offending noise by about 75 percent throughout the recording. I should stress that this is rarely needed, and it's always a last resort, because such processing can generate swirly, metallic artifacts that draw more attention to themselves than the noise you intended to eliminate! But it's good to listen for such issues with fresh ears at the start of your editing session. If you find yourself using noise‑reduction often, that's a sign that you should find a better place to record, or improve the isolation of the space you've chosen. Don't forget that there are other ways to deal with some noise: often, a high‑pass filter is all you will need to clean up a recording, for example. Also remember that if your recording is to be mixed with music, slight background noise won't be noticeable, and that the more exposed your voice in the end product, the more problematic noise will become.
To learn more about Nelson Mandela's Favorite African Folktales, visit www-mandelasfavoritefolktales-com.Perhaps the most experienced voice editors are those who work on audiobooks. Nelson Mandela's Favorite African Folktales won the Audies 2010 Audiobook Of The Year award, and features the voices of Matt Damon, Whoopi Goldberg, Hugh Jackman, Samuel L Jackson, Scarlett Johansson, Debra Messing, Alan Rickman, Charlize Theron and Forest Whitaker, among other artists. Recorded in New York, Los Angeles, London, Miami and Johannesburg, this audiobook was co‑produced, edited, and mixed by Michele McGonigle of New York City's Hachette Audio. I invited Michele to tell me a bit about this project and offer some advice to voiceover artists working from home:
Another factor to consider is how the project is being used and in which medium. If you record a commercial that’s airing nationally on television, then that is a larger rate than a regional television commercial specific to a certain market. The voice-over spot you worked on is being seen by more viewers nationally as opposed to regionally, which warrants more compensation. You should not only consider your session fee, but also get the specifics on how the voice-over is being used. My personal opinion is to avoid “in perpetuity” usage because as your career develops, something which was not a conflict in the past could be in the future. If the spot you had conflicts with another brand in which you are auditioning, this could become a conflict that was unforeseen when you initially booked and recorded the job.

Important: Use headphones to check the audio quality of your test recording. Your computer speakers will not be good enough for this. Headphones allow you to listen closely to ensure clear audio. Obviously, you want the audio to sound good on even the cheapest speaker, but you will be much happier if you use headphones. Remember, a good portion of your video viewers will listen this way, so you want to be sure they’ll have an optimal experience.


Even if you're mixing yourself, it's better to add EQ and compression only when you can hear how it will sit with the soundtrack or special effects. Ultimately, it comes down to knowing what your voice will be used for and making a judgement. For instance, if I'm recording a tagline for a TV or radio advert, I'll generally run a mic into a nice preamp (where I might add slight tube warmth, and subtle EQ or compression, just to give the recording a bit of 'body'), and I may do a little de‑essing using a plug‑in when performing any edits. However, for e‑learning jobs, corporate videos and so on, I'll tend not to add any creative processing while recording or editing, and will only use the de‑esser ever so slightly.
How much do voice actors make? There is of course no simple answer to this. What you get paid as a voice actor will depend on the type of work, size of project, your experience and many other factors. Some voice actors who are also movie stars, are worth millions. Others, who use freelancing sites can make as little as $30 for a simple radio commercial in a small market. Most professional voice actors fall in between.

As editor, you need to turn the raw recording into the final version of the file you'll be sending to your client. Editing during a recording session can be problematic, and particularly so if you're recording in a domestic environment. How can you expect to hear the drone of the dishwasher ruining your recording if the dishwasher is still running as you edit? I'll look in more detail at setting up a voiceover recording studio next time, but for now, if recording in a separate room or isolated booth isn't an option, at least try to edit the file the following morning (or maybe at night) when there's less noise around — because hearing your recording with a fresh ear and in a quieter environment will help you to make better editing decisions, and will reveal noises that slipped your attention earlier.

×