How much do voice actors make? There is of course no simple answer to this. What you get paid as a voice actor will depend on the type of work, size of project, your experience and many other factors. Some voice actors who are also movie stars, are worth millions. Others, who use freelancing sites can make as little as $30 for a simple radio commercial in a small market. Most professional voice actors fall in between.
Next, run these files through any standard EQ high‑pass and low‑pass filters you use, zoom in on the waveform, and select a one‑second strip of silence from each recording. Save these strips as separate files. For instance, on my system, a one‑second strip of silence recorded at 16‑bit, 44.1kHz on a Neumann TLM103 would have this name: room_tone_neumann_tlm_103_44100_16_one_second.wav. Ideally, the noise floor of each strip will be lower than ‑60dB. Now, when you have to remove a bump or a squeak between words, you can paste in a piece of these strips instead of muting, which would draw attention to the edit. 

As the engineer, your key job is to select and set up the recording space, choose and position the microphone, set levels and make sure you're recording a good, clean signal at a healthy level. Like music, the louder the signal you want to record, the less audible the noise floor, but you don't want to have to speak louder than sounds natural, and you don't want to overcook things when tracking: any distortion will be very noticeable on an exposed voice part, and an otherwise great take with digital clipping won't be acceptable. If you notice clipping only when you start editing, software clip restoration tools might help to make the take usable, but it's not going to be perfect. Remember that although you may have needed to record 'hot' on analogue tape and older 16‑bit digital recording systems, modern 24‑bit A‑D converters can accommodate a much wider dynamic range, so you no longer have to track so loud: you can leave much more headroom.

Much of the working week as a voice actor, is taken up with auditioning. The success of auditions will depend on your skill, understanding of the brief, speed to deliver, your technical ability and how well you record your voice. By tracking and improving your success your can improve the ratio of auditions to paid work. This in itself requires you to match your voice to the auditions that are a natural fit to your vocal ability and style. As your experience and voice skills expand, so the breadth of work that you can audition for increases.
First, I like to listen to the entire voice over recording from start to finish. I may make notes here and there to remind myself of something I want to go back and edit, but this time through I really just want to concentrate on the overall pacing and tone of the recording. Does it sound like I hoped? Did I rush or speak too slowly? Did I flub any words, mumble, or misspeak? Are there weird silences or unknown sounds?
It's only after this sort of processing that I'll start cleaning up the recording and dealing with the gaps of silence between spoken passages. A noise gate (or an off‑line 'strip‑silence' function) can be used to automatically mute sections that fall below a certain level. However, if not used carefully, these tools will clip the 'T's and 'P's off the ends of words, and shut out natural breathing sounds. Worse, if your recording is noisy, a noise gate will actually draw attention to the problem, since your client will be able to hear the difference between room tone and absolute muting. Another trick is to use a downward expander to reduce the noise floor of quiet sections, rather than cut out the noise completely.
Some of you might be wondering about the difference between voice over and narration. The short answer: not much. In most cases, you may use voice over and narration fairly interchangeably. However, to be technically correct, narration typically refers to an audio vocal that describes all the action on screen or tells a story based on what’s happening, while voice over may or may not describe as much action and is often more instructional in nature.
Some of you might be wondering about the difference between voice over and narration. The short answer: not much. In most cases, you may use voice over and narration fairly interchangeably. However, to be technically correct, narration typically refers to an audio vocal that describes all the action on screen or tells a story based on what’s happening, while voice over may or may not describe as much action and is often more instructional in nature.
Before you get down to the nitty-gritty, though, I recommend doing a test recording to ensure your equipment works properly and your audio levels are strong. You don’t need to record the entire script, but a few paragraphs will give you enough to ensure that the audio is clear, at an appropriate level, and doesn’t include any stray or ambient noises.
There are lots of ways to get voice acting work, from online sites such as Bodalgo.com, Mandy.com, Voice123 and Voices.com. These are known as pay to play sites. They have lots of opportunities for you to audition, but it is highly competitive. Looking locally for businesses, including radio stations, that need voiceover is also a good way to start.
We screen our talents to make sure your voice recording has a professional broadcast quality level. Once you order a project, your money is absolutely safe with us. We do not pay the voiceover artist until the project is successfully done and approved by you. You can asks for revisions at no extra cost as long as they don't involve changes in the script.
No place is totally silent, so find the best place you can — even if that means thinking outside the box. I have a friend who regularly records his podcast in his car. He lives in a small house with dogs and kids, so there really isn’t anywhere else quiet enough. He takes his laptop and mic out to his driveway, shuts himself in the car and records. The results are surprisingly good!
Be mindful of the sounds of your heating and cooling system (this goes for a home recording studio, as well). If you can’t find a spot where you can’t hear air rushing through your ducts, you may want to shut down your furnace or AC for the duration of your recording. If your recording space is near a window, listen for sounds of traffic — especially loud trucks. They will definitely show up in your recording.
There are now more opportunities in the voiceover industry than ever before — but competition has never been so fierce — so, in this short series of articles I'll set out what you need to know to get started as a home‑studio voiceover artist, and turn it into a paying job. This month, I'll explain some differences between the voiceover and music industries, and run through the different roles you'll need to become good at. Next time, I'll discuss what makes a good voice, the sort of home‑studio setup you need, and how you can start to get the jobs coming in.
As the engineer, your key job is to select and set up the recording space, choose and position the microphone, set levels and make sure you're recording a good, clean signal at a healthy level. Like music, the louder the signal you want to record, the less audible the noise floor, but you don't want to have to speak louder than sounds natural, and you don't want to overcook things when tracking: any distortion will be very noticeable on an exposed voice part, and an otherwise great take with digital clipping won't be acceptable. If you notice clipping only when you start editing, software clip restoration tools might help to make the take usable, but it's not going to be perfect. Remember that although you may have needed to record 'hot' on analogue tape and older 16‑bit digital recording systems, modern 24‑bit A‑D converters can accommodate a much wider dynamic range, so you no longer have to track so loud: you can leave much more headroom.
“Bunny Studio Voice has a very efficient process to help us identify the right voice actors that best meet each of our video’s needs. Their platform keeps us informed throughout the process, from the actor accepting the project all the way through when the recording is complete. I highly recommend them as a reliable, high quality and cost-effective voice over provider”
As the engineer, your key job is to select and set up the recording space, choose and position the microphone, set levels and make sure you're recording a good, clean signal at a healthy level. Like music, the louder the signal you want to record, the less audible the noise floor, but you don't want to have to speak louder than sounds natural, and you don't want to overcook things when tracking: any distortion will be very noticeable on an exposed voice part, and an otherwise great take with digital clipping won't be acceptable. If you notice clipping only when you start editing, software clip restoration tools might help to make the take usable, but it's not going to be perfect. Remember that although you may have needed to record 'hot' on analogue tape and older 16‑bit digital recording systems, modern 24‑bit A‑D converters can accommodate a much wider dynamic range, so you no longer have to track so loud: you can leave much more headroom.
I’m new to this so keep that in mind, but I use a cheap “dog training clicker” to mark my redo portions. They are very visible in the sound track. In longer recording sessions (where I won’t remember the error) I’m experimenting with using 1,2 or 3 clicks to indicate how far I plan to back up for the restart. I can often find and do the cut without have to play anything – that by having an idea of how far back I need to look.

At the end of the day, we all need to have a baseline of what is an acceptable pay rate and what you may need to walk away from politely. This is a competitive market and when you have put in the training, financial investment, technical education in perfecting your studio sound, and countless hours practicing in the booth you must advocate for yourself and know your worth! If you have any questions, reach out to the SAV community. We’re here to be stronger together as you move through your voice acting career!
Realistically as a voice over actor you make between who can’t make $50k – $100k by using online casting sites and local agents and of course hustling for work on your own. That’s right, you need to hustle. I often hear voice over actors say that they they are not good at marketing or selling. Yet every business owner has to do this to make money. So learning these skills can make a big difference to your earning potential.
When you come to actually recording your voice, try to think of the mic as the ear of your listener. Picture your listener, have an opinion, and read the script as if the words were coming to mind that instant. The distance between your mouth and the mic should be about the same as the distance between your thumb and pinkie when making a hang‑five gesture (see the picture above). Move closer to the mic when you lower your voice and back off when you speak louder. On‑line dictionaries such as the Merriam‑Webster one pictured here, often include audio examples which can help you clarify pronunciation. Just make sure that you use an American English or UK English (or other language!) version as appropriate. (Remember, while you have your engineer hat on, to take account of this when setting levels.) Always use a pop shield, and I'd suggest trying to work slightly off‑axis, as talking to a point just to the right or left of the mic will prevent bursts of air and drops of saliva ruining your recording. I'd also recommend wearing headphones over one ear only, as this allows you to judge volume and listen for clipping and plosives on the recording, while also hearing your natural voice, which makes it easier to focus on that message we talked about. Simone demonstrates this technique in the picture on the next page. Hhe's working slightly off‑axis and has backed off an inch or two to deliver with more energy.Typically, you'd record with your mouth approximately the distance between your thumb and little finger from the mic, as pictured here.
However, there are lots of second tier voice over agencies and ones that are just getting established. One of your goals as a voice actor should be to get listed by an agency. However, wait until you have at least established yourself and put together a portfolio of work and super hot demos you can send out to them for consideration. When selecting an agent you need to carefully examine who they currently represent and then ask yourself: How do I fit in here? Does this agent have anyone like me on their books? If not, you will most definitely stand a better chance of being represented.
A better, more natural-sounding way to clean up a voice recording, though, is to paste in strips of 'silence' that showcase your home studio at its best. To do this, wake up early (ie. when your house is quiet), turn on your gear and set your levels for a normal job. Then record a full minute of silence at whatever bit depths and sample rates you're likely to be using. Repeat this process for each different mic you use, and save each file in a folder titled Room Tones, or something similarly suitable.
First of all let’s dismiss the obvious – there is no such thing as a standard rate, there are only guide lines and even these vary by Country and type of work. The only standard rates are those set by some Union scale rates. One of the most notable differences is that between voice over union rates and voice over rates non-union. Unions provide a standard voiceover rate and therefore you can safely rely on the unions guide (depending on which Country you are in). However, non union voice over rates vary enormously and are often down to negotiations between the voice over actor and the client.
Next, go back to the beginning and start editing out your mistakes. I also like to edit out any abnormally long silences between sentences or statements and any weird sounds that don’t belong. Remember, though, that pauses are ok (and even necessary) to help break up the audio and make it feel more natural and conversational, so don’t go hog wild with it.
Why the difference in approach? Lots of my e‑learning and corporate jobs are done for production houses that will be adding other voices to the mix. Ironically, if I record my voice via a great mic and preamp, and add some nice processing, it can end up standing out from the other voices, drawing attention to itself. The production house will see this as me causing them a problem, even though my recording sounds better than the others!
We screen our talents to make sure your voice recording has a professional broadcast quality level. Once you order a project, your money is absolutely safe with us. We do not pay the voiceover artist until the project is successfully done and approved by you. You can asks for revisions at no extra cost as long as they don't involve changes in the script.
Congratulations! You should now have a finished voiceover recording. Save a final copy with the extension _master and use this version to save another copy in the format requested by the client. But don't think your job is done when you hand everything back to your producer‑self. Running a profitable home‑based voiceover business takes more than building and equipping a home studio and recording and editing audio files. You still have to design a web site, launch a marketing campaign, and secure new clients — all of which is something we'll look at another time.  

This is the number-one issue most people bring up when they discover they have to do voice over work for their video. Let’s face it. Most of us rarely have to hear our own voices in audio recordings. We’re used to the rich, warm sound of our own voices in our own ears. There’s no way around the fact that you sound different on recording that you do to yourself.


No place is totally silent, so find the best place you can — even if that means thinking outside the box. I have a friend who regularly records his podcast in his car. He lives in a small house with dogs and kids, so there really isn’t anywhere else quiet enough. He takes his laptop and mic out to his driveway, shuts himself in the car and records. The results are surprisingly good!
First of all, don’t be put off by the word technical. The ‘technical’ skills you need to learn to involve how you record and then edit your recording and of course you will need a home studio to do this. This needn’t be a daunting prospect though. Many freelance sound engineers are available who can help you with this – contact us if you want a reputable one.
"When recording voiceovers at home, you have to focus on performance: keep your energy levels up, stay true to the page, pronounce words correctly and consistently, and make sure you keep to a schedule to make the deadline. Prep well so you don't waste time second‑guessing yourself, looking up words as you go, and remember to not over‑ or under‑direct yourself. Also, make sure you know your recording equipment and room well; being able to quickly make adjustments to mic placement, levels, and so on, will make you more efficient.”

There are two main priorities in voiceover work: the message that you're being asked to convey; and invisibility — by which I mean you never want people to notice your voice. This might sound counter‑intuitive. After all, why not make your voice sound great? Well, you need the listener to focus on the message your client is paying you to get across, rather than your voice itself, so it needs to sound natural. Even for tag lines, where you might think a fuller, warmer, more compressed (or whatever) voice would be appropriate, the production house will often want to perform EQ and compression themselves. This lesson took me a long time to learn, but my clients are much happier when I send them a nice, dry recording. I simply remind myself that I'm supplying the raw material for them to add to their mix, and letting them make their magic.

“Bunny Studio Voice has a very efficient process to help us identify the right voice actors that best meet each of our video’s needs. Their platform keeps us informed throughout the process, from the actor accepting the project all the way through when the recording is complete. I highly recommend them as a reliable, high quality and cost-effective voice over provider”
A great performance recorded on mediocre gear will always sound better than a mediocre performance recorded on great gear. By preparing well, before the session, you'll find it far easier to relax and focus on the message and the listener. As a producer, it's important to be clear what the expected format is for the final audio file. Although there are certain 'standards', your clients' expectations will vary.Read through the script, look up any questionable words and check their pronunciation. For American English, which accounts for the majority of my work, my favourite pronunciation resource is the Merriam‑Webster on‑line dictionary (www.m‑w.com), which includes audio examples. If you don't know how to pronounce the name of a company or product, call the company's customer service centre (if anyone can pronounce it right, they can!). If you don't know how to pronounce the name of a person or city, try searching YouTube for news reports on the subject.
×